General
Extend Space Required based on Engraving Layer Speed for stock Odin Series Machines
Based on the device settings of: The estimated space needed on both sides of the engraved artwork is as follows: Based off the chart formula derived by Excel: Nova Vs Odin Comparison: Effective Bed Width Based on Engraving Speed: *Note that this ...
Odin Series Dimensions & Weight
ODIN Series Weights & Dimensions ODIN 22 Weight 441LB (200kg) ODIN 32 Weight 569LB (258kg)
Critical Spare Part Recommendations for Odin Series Machines
This article discusses spare parts needs for your Thunder Laser machine, verify all part numbers for your existing part. Links may change, expire outside of our control. If your laser is your business and down time is not acceptable while you wait on ...
ODIN 32 55w Coherent Material Libraries
This article and library are PRELIMINARY and still under development. *This information is provided “AS IS” to provide a starting point. It is always a good idea to run tests on each substrate and update the library as necessary. The precompiled ...
Odin Series DSP TL Timer Mid 2022 Block Diagram v8.4
Please See the Attached: TL Timer V8.4 Flap V4.1 Page 1: Power Control - RF Tube Page 2: Controls signals Without RF Fan Control Page 3: Control Signals with RF Fan Control Page 4: Relay Control
Bolt and Odin: Lens Selection and Comparison
Preface: This article covers the difference between the Four Lens options for the Odin series machines. The same principles apply to the Bolt as well. Intro Video: The Four Lens Options Side by Side: Engraving Test: The same picture was engraved with ...
ODIN 22 MACHINE PICTURES FROM 2022 REFERNCE IMAGES
This article provides pictures of the internal components of a 2022 Model of an ODIN 22. Your actual pictures may vary. Odin Y Axis Home Sensor ODIN Y Axis Home Sensor ODIN Y AXIS HOME SENSOR MADE ODIN Y AXIS HOME SENSOR ODIN X Axis Home Sensor ODIN ...
PKP544N18A2 Motor
This is used as a X axis motor for the Bolt and Odin series machines The PKP Series high-performance stepper motor offers superior performance, high torque while providing low vibration and low noise. Basic step angle is 0.72° (500 steps per rev). DC ...
Odin Series User Manual
Please see attached
Odin Series Setup