ODIN 32 55w Coherent Material Libraries

This article and library are PRELIMINARY and still under development.

*This information is provided “AS IS” to provide a starting point. It is always a good idea to run tests on each substrate and update the library as necessary.

The precompiled LightBurn library file can be downloaded here.

The LightBurn file may differ from the original document.

Here is short tutorial on how to upload the clb file into LightBurn: Uploading the LightBurn Materials Library

• Related Articles

• Material Libraries and Safe/Unsafe Resources

  Machine Material Library Located below you will find our machines and their associated library. Click the link to download and install the Lightburn Library for your machine wattage. These material settings will help you fine tune your cutting and ...

• Odin 32 55w Coherent Tube Spec Sheet

  Preface: This article has a spec sheet from the OEM. Your tube should be marked as a C55-A model. If you have a 60W Odin-32 then this is not your tube. Specs Overview: OEM website can be found here.

• LightBurn Material Test File

  Preface: The article covers some pre-made material test cards and the built in Lightburn Material Test Generator for CO2 lasers like the Thunder Laser Bolt, ODIN and Nova machines Quick Start Videos: New Style Test Cards Lightburn Material Test Video ...

• Legacy Lightburn Material Test File

  Preface: The article covers some pre-made material test cards and the built in Lightburn Material Test Generator for CO2 lasers like the Thunder Laser Bolt, ODIN and Nova machines Quick Start Videos: Legacy Material Test Cards Lightburn Material Test ...

• Thunder Laser Aurora Lite 50W Galvo Material Library

  This information is provided “AS IS” to provide a starting point. It is always a good idea to run tests on each substrate and update the library as necessary. The Official Thunder Laser USA Material Library file is linked here. Here is short tutorial ...