Odin Series Setup

Odin Series Setup

​


    • Related Articles

    • Odin Series User Manual

      Please see attached

    • Odin Series Getting Started

      ODIN Series Getting Started Introduction: So you just bought a new Thunder Laser? This guide will help get you up and running. We will cover topics that you should complete Before the machine arrives and After the machine arrives. Some of the videos ...

    • RotoBoss Roller Rotary Setup

      Preface: This Article covers how to set up the rotary to get your steps right for a given tumbler and some best practices. This article is relevant for Thunder Laser Gantry style Lasers with Ruida Controllers. The information contained in here is not ...

    • The Usual Suspects and Preparing For Your 1 Hr. Training

      Preface: The Usual Suspects are the things that most commonly get overlooked or are incorrect that can burn up training time on things that should already be checked and if not mastered. If you choose to not follow this guide you will likely ...

    • Roller Rotary Tips, Tricks and what to watch out for on your Thunder Laser Nova, Odin or Bolt Series Laser

      Preface: This Article covers some tips, tricks and watchouts for your Roller Rotary on a Thunder Laser Nova, Odin or Bolt series laser. Things to know before you begin for Rotary Journey Here is a list of things to know ahead of time which will make ...
    If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.

      Information contained in this Knowledgebase, on this page, in this or any other  Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.