Preface: This article covers the wiring for a 5 pin rotary based on the V5 TL Timer Wiring Schematic Wiring at Port: Port: Ruida Controller Connections: This design uses common signals with the Y Axis D2 connector Pin Designations: Pin 1 - +36V - ...
Preface: This article covers how to determine if you have a 5 pin or 7 pin Rotary on your Thunder Laser machine These Machines ONLY have Seven Pin Rotary Ports: -Thunder Laser Bolt -Thunder Laser Odin 22 and Odin 32 -Thunder Laser Aurora, Aurora Pro, ...
Preface: This article is for those users with older machines that have a 5 Pin rotary with a switch and are using Lightburn. Your rotary is driven by the Y axis output and not the U Axis output. Background: Older Thunder Laser machines used the Y ...
This guide will walk you through determining a possible reason as to why your rotary will not spin. If you complete this guide with not definitive cause, please email support@thunderlaserusa.com and summarize what you completed. Things to check and ...
This article describes the situation where when the Roller Rotary is plugged in, the X, Y and Z (Honeycomb) Axes will not move and the rotary will not spin. Other Articles of interest: Thunder 7 Pin XLR Rotary Port Rotary Axis no motion ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!