EzCad
How to run EzCad3 without being connected to the Thunder Aurora Laser machine
Preface: This article covers how to run EzCad3 without being connected to the machine. This article was purposely made short and brief, as the user is expected to be versed in EzCad3 to be able to complete it. The settings changes being shown, if not ...
MISSING DLL File when trying to install or Run EzCad2 EzCad3 EzCad
If you get an error message about a missing DLL or multiple missing DLL's file try this: -Install Microsoft Visual Studio C++ 2015 for your computer (x86 or X64) https://www.microsoft.com/en-us/download/details.aspx?id=48145 -Reboot your PC after the ...
Aurora Drivers & Software
You can find the listed drivers, software, and utilities attached at the end of this document LMC driver 64bit The latest driver for the EZCAD2 (NON PRO) units is attached. Aurora NON PRO Factory USB Drive Image The Full Aurora USB Contents zip File ...
EzCad3 User's Manual
You will find the EzCad3 User's Manual attached at the bottom of this document
Face to 3D Plugin and Sample STL File for Ezcad2
All of this is from the Fiber Laser, The Next Level group and is content from various members. This is not Thunder Laser USA's work. https://www.facebook.com/groups/fiberlaserthenextlevel/posts/251914833223404/ line 0.005 speed 1250 power 90 layers ...
EzCad2 User's Manual
You will find the EzCad2 User's Manual attached at the bottom of this document 1 you can find the zip file of the aurora non-pro usb stick here