Aurora Drivers & Software

• Related Articles

• Aurora Installing Lightburn (non-Pro)

  Preface: This article covers installing Lightburn for your Thunder Laser Aurora Galvo laser. The Aurora series contains models with different lens options and characteristics, do not rely on the pictures to match your file naming or workspace specs ...

• Aurora Series Unified User's Manual

  Please see the manuals for both Aurora series V1 and Aurora series V2 attached below Note that the manual is Windows and Ezcad centric due to being the GLOBAL manual. Thunder Laser USA has compiled information on Lightburn, Windows and MacOS in this ...

• How to calibrate the Focal Distance on a Thunder Aurora 1.0 Pro or Aurora 2.0 Galvo Laser with Windows

  Preface: This article covers the use of the Thunder laser auto focus software and some of the basics of setting up the new Lens in EzCad3 or Lightburn. It does not cover the topic of finding the optimum focal distance. Quick Start Video: Complete ...

• Aurora Series Wiring Diagram v8.4

  Please see attached. These are for the V1 Auroras that do not have a Keyed switch on the front.

• Aurora Auto Door

  Preface: This article covers how to perform an electronic bypass of the AUTO Door and how to adjust the AUTO Door if it is malfunctioning. Aurora AUTO Door Bypass Bypassing the Aurora AUTO Door is quite simple and you can even add a handle to fully ...