Preface: This article attempts to cover everything you need to know about Job Origin and the Start From options in Lightburn. There are many things that the Origin is affected by and the origin can affect other functions depending on how it is implet ...
Preface: This article is a rough draft of the instructions at the software is a new release. Quick Start Video: Complete Guide: 1.NOTE:we need to install the driver (CH34xVCPDriver.app) before using the Auto Focus software (autofocus.app).. ...
Preface: This article covers how to import your device Profile using the Thunder Laser supplied file on the USB stick included with the machine that is being implemented in Q2-Q3 of 2023 Note: This new method will make it a lot easier to import and ...
Preface: this article covers the basics of Lead-in and Lead-out Quickstart Video: Complete Guide: Usage Case: At the start of a cut, you will get a surface char mark as the laser completes the plunge through the material since the soot has no where ...
Control Software Control Software is specific to certain laser controllers and DSP's and is primarily used to control the laser. Some control software has no design or editing function at all and some, like LightBurn, have fairly advanced design ...
The following repo includes files have been purchased for Thunder Laser USA by Chris Baker with a license that allows Thunder Laser USA Clients to use these files for their personal and commercial use. It also includes more CO2 gantry files and ...
This is our deep dive into The Russ Formula for Successful Photo Engraving (see attached PDF below). See Russ Sadler's original work (on which our tests are loosely based) at the end of the article. We are also incorporating a viewer's feedback on ...
Preface: This article covers how to enter your scanning offsets properly and some steps to troubleshoot what went wrong and where to find your offsets if you lose the gold card. If you have a new machine that was built and shipped around Q2 2023 or ...
Since LightBurn 1.2.00, a function has been added to the device settings in LightBurn to define a time delay for the start and end of a job. Click the wrench/screwdriver icon to open the pop-up Device Settings window. Adjust your start delay to ...
Preface: This article covers how to Load the Material Library that you download into Lightburn How to Video: Complete Guide: Things to note: 1. The Library File that you download will always need to exist. Do not Delete it. Lightburn will reference ...
Preface: This article covers how to clean your optics on your Thunder Nova Series Laser Lenses Explained Quick Start Video: (Video Credit: Robert Kofoed of Computer Creationz) Complete Guide: Before you Begin: Cleaning your optics can help keep your ...
*This information is provided “AS IS” to provide a starting point. It is always a good idea to run tests on each substrate and update the library as necessary. The Official Thunder Material Library PDF below and the precompiled LightBurn library file ...
Preface: This article covers various cuttings speeds for different materials based on testing. Your specific results will rely on having a similar material and setup. Results are not guaranteed. Parameters Chart: Find the material you want to cut in ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!