NOTE: THIS MACHINE WAS PURCHASED USED AND IS ASSUMED TO BE A STOCK OFFERING FROM THE USA BASED EQUIPMENT RESELLER. WE WERE UNABLE TO ACQUIRE A MACHINE DIRECT SINCE THE USA BASED EQUIPMENT RESELLER DECLINED TO SELL ThunderLaserUSA A MACHINE EVEN AFTER ...
THIS IS FOR THOSE SPECIFICALLY AUTHORIZED DIRECTLY BY THUNDER LASER USA. IF YOU HAVE FOUND THIS PAGE BY ACCIDENT, PLEASE BROWSE AWAY FROM THIS LINK AND CLEAR YOUR BROWSER CACHE. Please get connected 15 minutes prior to the start time of the event so ...
It has been discovered that the labels for the lens cleaner and the lubricant were accidentally swapped in an unknown lot of tool boxes Please be aware of this. Please contact us if you have any issues or questions. Sorry for any trouble.
This affects fewer than 50 machines as defined below. We are tracking the machines to the client so we can proactively address the issue. If you think your machine is affected and you have not been contacted, please email support@thunderlaserusa.com ...
This is a remote session initiated by the support ticket system in reference to bad engraving and distorted preview image on the controller as well as a communication issue with the ethernet connection.
Since LightBurn 1.2.00, a function has been added to the device settings in LightBurn to define a time delay for the start and end of a job. Click the wrench/screwdriver icon to open the pop-up Device Settings window. Adjust your start delay to ...
Preface: This article covers how to Load the Material Library that you download into Lightburn How to Video: Complete Guide: Things to note: 1. The Library File that you download will always need to exist. Do not Delete it. Lightburn will reference ...
Preface: This article covers how to clean your optics on your Thunder Nova Series Laser Lenses Explained Quick Start Video: (Video Credit: Robert Kofoed of Computer Creationz) Complete Guide: Before you Begin: Cleaning your optics can help keep your ...
*This information is provided “AS IS” to provide a starting point. It is always a good idea to run tests on each substrate and update the library as necessary. The Official Thunder Material Library PDF below and the precompiled LightBurn library file ...
Preface: This article covers various cuttings speeds for different materials based on testing. Your specific results will rely on having a similar material and setup. Results are not guaranteed. Parameters Chart: Find the material you want to cut in ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!