Thunderlaser-USA | Troubleshooting

Troubleshooting
Screen shows PWM Alarm: Troubleshooting the cause
Preface: This article covers some things to check if you get the PWM alarm on the screen PWM alarm message: The PWM is the signal from the controller in the machine to the fanboard that goes to the laser tube to tell the tube hot much power to ...
Thunder Bolt Troubleshooting guide for having an Alarm Messege on the Screen
***This article is a work in progress as we coordinate translations and clarity of the message, please be patient*** Below is a list of warning messages that may appear on the screen of your Thunder Bolt Machine 1、 Warning while trying to Frame or ...

Thunderlaser-USA | Troubleshooting | Knowledge Base