Preface: This article covers the use of the Thunder laser auto focus software and some of the basics of setting up the new Lens in EzCad3 or Lightburn. It does not cover the topic of finding the optimum focal distance. Quick Start Video: Complete ...
Preface: This article covers how to determine which lens you have installed on your Aurora Fiber Laser Visual Marking: Look for the F-### on the lens. It should be either F-160, F-210 or F-290. Basic specs for each lens: Focal Distance Specs for Each ...
Since LightBurn 1.2.00, a function has been added to the device settings in LightBurn to define a time delay for the start and end of a job. Click the wrench/screwdriver icon to open the pop-up Device Settings window. Adjust your start delay to ...
Preface: This article covers how to Load the Material Library that you download into Lightburn How to Video: Complete Guide: Things to note: 1. The Library File that you download will always need to exist. Do not Delete it. Lightburn will reference ...
Preface: This article covers how to clean your optics on your Thunder Nova Series Laser Lenses Explained Quick Start Video: (Video Credit: Robert Kofoed of Computer Creationz) Complete Guide: Before you Begin: Cleaning your optics can help keep your ...
*This information is provided “AS IS” to provide a starting point. It is always a good idea to run tests on each substrate and update the library as necessary. The Official Thunder Material Library PDF below and the precompiled LightBurn library file ...
Preface: This article covers various cuttings speeds for different materials based on testing. Your specific results will rely on having a similar material and setup. Results are not guaranteed. Parameters Chart: Find the material you want to cut in ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!