How to identify the Lens on your Aurora Fiber Laser whether it is F-160 F-210 or F-290 for 110x110, 150x150 or 200x200mm working area
Preface: This article covers how to determine which lens you have installed on your Aurora Fiber Laser
Visual Marking:
Look for the F-### on the lens. It should be either F-160, F-210 or F-290.
Basic specs for each lens:
Focal Distance Specs for Each Lens:
References:
Related Articles
Aurora Series Unified User's Manual
Please see the manuals for both Aurora series V1 and Aurora series V2 attached belowAurora Installing Lightburn (non-Pro)
Preface: This article covers installing Lightburn for your Thunder Laser Aurora Galvo laser Lightburn Software for Galvo is a powerful design and communication tool for your Thunder Galvo Laser. Following this guide will help you install Lightburn, ...How to calibrate the Focal Distance on a Thunder Aurora 1.0 Pro or Aurora 2.0 Galvo Laser with Windows
Preface: This article covers the use of the Thunder laser auto focus software and some of the basics of setting up the new Lens in EzCad3 or Lightburn. It does not cover the topic of finding the optimum focal distance. Quick Start Video: Complete ...Thunder Laser Aurora Fiber Galvo
AURORA 8 comes with 20w standard fiber laser source, 110x110mm field lens, EZCAD2 controller/ software as standard. Customers can choose optional 150x150mm and 200x200mm lenses if needed. AURORA 8 PRO comes with 20w MOPA laser source (or 50W fiber), ...How to Align your Thunder Laser Nova Series machine - Quick Start Alignment Guide
Preface: This article covers How To align your laser beam in a 3 mirror gantry based Nova laser. Here are some quickstart videos that will cover 90% of the situations. They do not contain every last iota of detail but should be enough to get most ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!