Thunder Nova Series USB Drive

Thunder Nova Series USB Drive

Your machine will come with a USB thumb drive. This drive contains the unified owners manual, RDworks software, and other files. These files are the OEM files sent with every machine globally. 


Thunder Laser USA provides a LightBurn license key with every dsp controlled machine so RDworks is not used, and the latest revision of the manual (as well as everything else you will need) is already in our support system making the files on the USB drive unnecessary.


Our Cheat Sheet is the best way to find all the info, programs, etc... you need to run your Thunder Laser USA machine:


CHEAT SHEET - Important Preparation & First Steps


This cheat sheet has links to the manual, LightBurn Software, and anything else you may  need and should be your main reference point.


The only thing useful on the drive is the preconfigured device profile to make setting up your laser easier. its not necessary so if you lose it, no big deal because setting up one from scratch isnt hard. thie device file on the drive is just quicker

more on that here:


    • Related Articles

    • Nova Series Users Manual

      For Thunder Laser USA support please email support@thunderlaserusa.com

    • Nova Series Getting Started

      Introduction: So you just bought a new Thunder Laser? This guide will help get you up and running. We will cover topics that you should complete Before the machine arrives and After the machine arrives. Safety First: For safety information, please ...

    • The Usual Suspects and Preparing For Your 1 Hr. Training

      Preface: The Usual Suspects are the things that most commonly get overlooked or are incorrect that can burn up training time on things that should already be checked and if not mastered. If you choose to not follow this guide you will likely ...

    • Connecting A Thunder Laser To LightBurn Via USB

      Preface: This article covers connecting your computer to the Laser with Lightburn and USB for Windows. If you have a MAC, it is strongly suggested to use an Ethernet connection, see here: Connecting A Thunder Laser To LightBurn Via Ethernet with a ...

    • Using Extension Cords With Thunder Laser Nova Series

      Preface: This article covers the use of extension cords for your Thunder Laser Nova Series machines Extension cords are not recommended but if you need to extend from the machines 6ft power cord and it is your only option then the details will be ...
    If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!