Nova 63 Stock 2" Head - Change In Length

• Related Articles

• Nova Series Users Manual

  Note that the manual is Windows and RDworks centric due to being the GLOBAL manual. Thunder Laser USA has compiled information on Lightburn, Windows and MacOS in this knowledgebase that should be considered. For Thunder Laser USA support please email ...

• Tuning The Focal Length on The Stock 2" Head

  This documentation is specific to the Thunder Nova series stock 2" (50.8mm) focal length lens assembly. We have typically used 6mm (1/4") as the reference for focus but it can vary. Thunder Laser actually specifies the focal distance as 4.5mm~6.5mm: ...

• Thunder Laser USA Beam Buddy HR Head Information & Instructions

  Description Our Thunder Laser USA Beam Buddy High Resolution Head is manufactured in Canada to our specifications and this head performs a bit better than the stock Thunder HR Head. More on that here: ...

• The Usual Suspects and Preparing For Your 1 Hr. Training

  Preface: The Usual Suspects are the things that most commonly get overlooked or are incorrect that can burn up training time on things that should already be checked and if not mastered. If you choose to not follow this guide you will likely ...

• Internal Breaker Tripping When Starting Or Running A Job

  Overview If you experience a condition where the breaker trips when starting or in the middle of a job and if you are using the stock air assist pump, then the culprit could be a failed or failing air pump. What Happens? We have seen internal ...