How to re-seat the Bolt or Odin Laser Head after a head crash

How to re-seat the Bolt or Odin Laser Head after a head crash

Preface: This article shows how to reinstall the bolt laser head after a head crash or any reason that the head got displaced from the gantry bar

Quick Start Video:






Other Considerations:

After a head crash you may also need to check your X/Y verticality and your alignment as well as your endstops.

    • Related Articles

    • LightBurn For Galvo Crash Course

      The wait is over on June 30th Galvo Support for EzCad 2 and EzCad 2 Lite devices come with the LightBurn Software 1.2 release. On top of Galvo support, 1.2 comes with a number of new features including: Sub-Layers Device Linked Libraries Head-Mounted ...

    • Thunder Laser Bolt and Odin Lens Kit assembly Guide

      Preface: This article covers how each of the 4 lens kits should be assembled so that they fit in the laser head properly.

    • How to check and Adjust the X and Y Axis Endstops on a Thunder Laser Bolt Series Machine

      Preface: This article contains information on how to the check the function of the Thunder Bolt Endstops and how to adjust them Quick Start Video: Complete Guide: This guide aims to cover how to check a Bolt X or Y Endstop for function, how to adjust ...

    • The Usual Suspects and Preparing For Your 1 Hr. Training

      Preface: The Usual Suspects are the things that most commonly get overlooked or are incorrect that can burn up training time on things that should already be checked and if not mastered. If you choose to not follow this guide you will likely ...

    • Preventing & Recovering From A Head Crash

      Why would my head crash? Well, there are many possible scenarios. We will go through a few here: Design and/or Operational Errors If certain conditions are met in the settings, design and workflow of the project the z axis could react unexpectedly. ...
    If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!