Guest Connection For OBS via VDO.ninja

THIS IS FOR THOSE SPECIFICALLY AUTHORIZED DIRECTLY BY THUNDER LASER USA.

IF YOU HAVE FOUND THIS PAGE BY ACCIDENT, PLEASE BROWSE AWAY FROM THIS LINK AND CLEAR YOUR BROWSER CACHE.

Please get connected 15 minutes prior to the start time of the event so we can get your streams connected and test the hardware, production systems, audio levels, etc...

If you were given this link by a Thunder Laser USA team member, you will have been given a password to proceed. Please have it handy for the connection process.

A team member will already be in the video chat room with you and will assist and prep you for the event.

Unless discussed in advance, it's typically best to join with a webcam and audio source similar to joining a zoom, google meet, goto, etc...

If screen share is necessary, the team will facilitate that along with the camera view.

If you use your mobile device a stand/tripod is preferred and please flip it so the aspect ratio is 16:9 and not 9:16.

Click here or scan the code to join:

https://tlaser.us/vdoninja

• Related Articles

• Connecting A Thunder Laser To LightBurn Via USB

  Preface: This article covers connecting your computer to the Laser with Lightburn and USB for Windows. If you have a MAC, it is strongly suggested to use an Ethernet connection, see here: Connecting A Thunder Laser To LightBurn Via Ethernet with a ...

• Connecting A Thunder Laser To LightBurn Via Ethernet

  Preface: This article covers an overview of the connection types (Adhoc\Direct vs through a Router\Switch) for the Ethernet connection from your Computer to your Laser Machine. Note: The Ethernet connection is not Plug and Play and requires ...

• MAC Connecting A Thunder Laser To LightBurn Via Ethernet

  Preface: This article describes how to set up a direct connection to the machine which omits routers, hubs and switches that can add complexity and may not work even if you are able to ping the machine. If you are connecting your laser through a ...

• Windows Connecting A Thunder Laser To LightBurn Via Ethernet

  This article describes how to set up a direct connection to the machine which omits routers and switches If you are connecting your laser through a Router, then this article is not the one you need, please see this guide instead. There are multiple ...

• Chiller Power Cord Intermittent Connection

  We have had reports of the chiller having power issues due to the power connection on the rear of the chiller. The plug is not seating properly and can result in intermittent, or complete, loss of chiller power. Before you assume this connection is ...