CZ-TD550 Exhaust Fan Specs
The CZ-TD550w250W centrifugal blower fan rotates at 3,400 RPM, consumes 550W @110VAC/60Hz, and delivers 482.6 CFM of airflow at 0.35 psi. The fan utilizes a PMAC (Permanent Magnet AC) motor and is brushless
These are some specs from the same model 220v fan on another site:
Note: all of Thunder Laser USA equipment is 110VAC 60HZ. This is for reference only
This fan ships with the Nova 35, 51, and 63.
Details about the Nova 24 and Mini 60 fan can be found here:
To learn more about exhausting your laser see below:
Related Articles
Cleaning Your Stock Exhaust Fan
This is what can build up in your exhaust system, especially the fan, and can cause critical failure so its important to regularly maintain your exhaust system. Inline Fans (New) Here is how to clean the W150 Inline Fan that ships with the Mini 60 ...Venting The Exhaust From Your Thunder Laser
Preface: This article covers some key points about Venting Your Laser and adapting aftermarket exhaust components Important Considerations: Existing Systems Do not connect the exhaust output of this laser to an existing exhaust system. Please consult ...Using Aftermarket Inline Exhaust Fans
Why use an aftermarket fan The usual reason is to mitigate noise levels on the CZ-TD550 centrifugal fan. The W150 stock fan is an axial inline fan and is already pretty quiet. NOTE: ALL THUNDER MACHINES Q3 2021 CONTAINER #103 AND NEWER HAVE OEM ...Adding Manual Exhaust Fan Control
LightBurn now has start timers built in so the fan can spool up before the job starts. There are settings for end delay time too, but leave that at 0 because end delay is controlled by the TL-Timer. More information can be found on that here. There ...Thunder Bolt Exhaust
HF-100PE Exhaust Details: Nominal 4" exhaust, OD of exhaust flanges is ~96mm DESCRIPTION Product Detail: HF-100PE 4 inch is Direct drive and dust-free: suitable for clean rooms in microelectronics, food and medical industries. It comes with with ...