Air Assist
This is a typical installation of the dual stage air-assist in the Nova series machines. Your configuration may differ slightly. The maximum recommended...
Fri, Dec 4, 2020 at 12:29 AM
This kit is preassembled in Thunder Laser USA’s Support & Innovation Labs to be a “plug-and-play” solution to connecting a standard external air co...
Fri, Dec 4, 2020 at 12:29 AM
To calibrate the gauge, supply it with exactly 80psi using a regulator. Then Hold ON and UNITS at the same time for about 3 seconds. You will see 80 show up...
Sat, Nov 14, 2020 at 1:37 AM
The air assist is critical for keeping flare-ups at bay, mitigating smoke, helping keep the lens cleaner and cooler (it really shouldn't get that hot i...
Tue, Dec 22, 2020 at 7:23 PM
This stock air pump outputs about 5psi at 4.23 cfm. The cali air 8010 can output 90psi at 2.2cfm, for reference The manual is attached be...
Wed, Nov 18, 2020 at 5:34 PM
for Thunder Laser Nova series machines with single air-assist. This is an advanced level installation. Here are all of the resources we have on this: P...
Fri, Dec 4, 2020 at 12:29 AM
Selecting Between Low and High Dual Air Assist Stages In LightBurn If yours is working backwards please see this article: Thunder Laser Dual-Stage Air ...
Wed, Aug 19, 2020 at 8:04 PM
This article describes adding 3rd party bolt-on performance peripherials. Your stock Thunder Laser will run to our specifications right out of the box with ...
Sun, Jan 17, 2021 at 8:36 PM
Thunder Lasers with dual-stage air assist systems sometimes experience sequencing issues. This anomaly is predominately occurring when the laser is connecte...
Fri, Jul 24, 2020 at 8:06 PM