It is important to initially set up your machine with only the factory supplied peripherials and ensure proper operation. then you can evaluate what (if anything) you may want to do to your machine to enhance its performance. 


Complicating the initial setup also increases the operational difficulty, and creates rabbit holes when troubleshooting, should that become necessary.



There are some steps that need to be taken into consideration before operating your Thunder Laser Nova series engraver for the first time. Please take the time to familiarize yourself with these things. Even after given these resources, questions still arise that are covered in this information so please utilize this data to its fullest potential:


1. The manual has 99% of the information you will need like how to unpack, install, setup, and run the machine as well as optics specifications, dimensions, PM, troubleshooting and more. Refer to it before beginning and frequently thereafter. Here is the manual: Nova Series Unified Owner’s Manual (US)


2. There is safety information that must be understood and adhered in the manual and we expand on protective eyewear, fire suppression, etc... in this knowledgebase article: DANGER: Class 4 C02 Laser Radiation, PPE, & Fire Suppression.


3. This is what can happen if you don't frequently check your optics: Common ZnSe Focus Lens Failure


4. You must clean your optics prior to test firing your machine for the first time. Here is an article on how to do so:

Inspecting and Cleaning Nova Series Optics.


5. The dual-stage air assist will need to be understood and adjusted prior to using the laser. It is critical to help keep the lens from becoming fouled so quickly. You can find out more about how to set, select, and correct a sequencing issue here:


6. To help avoid head crashes please see these important articles:


7. You will need to do some important steps within LightBurn as soon as your machine is connected to your computer:


8. Make sure you have the proper electrical and exhaust connections:


9. Here are some resources for our rotary devices:


10. Here is info on the cameras:


11. Preventative maintenance information can be found here:


12. Should you require support, we have some best practices and links that can help you resolve your issues most effectively: