The Users Guide section will walk you through 6 steps for learning how to disassemble your Nova

Note: There’s glass laser tube inside the laser machine, be careful and do not collide with anything when moving.


Please do as following:


1. Remove the front door, the honeycomb table and the blades. (To reduce the weight and make it easier to move)


2.Remove the Tower Alarm Lamp;(take a picture of the wiring before you remove it)


PS : disconnect the wire from the connector ( 24V4 to green ; 24V5 to red ; 0V3 to black )

How to disassemble your laser cutter 

3. Fix the top lid.

4. Unscrew all the screws at the foot stand. There are 8 screws on each side.


5. Move the machine upper part with a trolley


6. After moving all the parts to your room, please reassemble them by fix 8 screws on each side.


HERE ARE THE EXTERNAL DIMENSIONS FOR THE NOVA SERIES MACHINES:

Nova Series Machine Dimensions