Here is what is included with your Thunder Laser Nova series.
See the attached PDFs for legacy info.
- 1. Focus Gauge
- 2. Optics Removal Tool
- 3 .Lens Cleaning Kit
- 4. 6mm Nozzle
- 5. Magnets
- 6. Lubricating oil
- 7. X/Y Limit switch
- 8. Allen Wrenches
- 9. Snap Ring Pliers
- 10. Spare belt
- 11. Retractable Blade
- 12. Reverse compensation settings
- 13. Acrylic
- 14. Spare laser power supply fuses
- 15. Ruler
- 16. Screwdrivers
- 17.Cable ties
- 18.Usb and Ethernet cable
1. Focus Gauge
Ensure correct focus between laser head and material (6mm).
2. Optics Removal Tool
Fixed ring for opening reflector and focusing lens.
3 .Lens Cleaning Kit
Frequent cleaning of the lenses helps to extend the life of the lenses.
4. 6mm Nozzle
Provides a soft blowing effect.
We need to make sure that the material is flat enough or it may not be in focus.
6. Lubricating oil
Reduced friction on Z axis leadscrews and corrosion inhibition between bearings and guide rails
7. X/Y Limit switch
Just in case
8. Allen Wrenches
For your convenience
9. Snap Ring Pliers
Used with the Allen driver to adjust the tightness of the fixed pulley.
10. Spare belt
If the original belt is badly worn, it needs to be replaced.
11. Retractable Blade
For cutting cable ties, unboxing, etc…
12. Reverse compensation settings
Parameters for optimizing machine engraving effects, each machine’s parameters are unique.
Testing the power of the laser for proper functioning There will be instructions in the link here:
14. Spare laser power supply fuses
Newer units may have circuit breakers
18.Usb and Ethernet cable
Connect with the machine.