Calibration and Replacement
Nova Plus Ramp Test and setting Autofocus Height for best engraving results
Preface: This article will cover the steps to perform a ramp test to be able to set the autofocus height and the length of the manual focus tool. For this procedure, it is assumed that you are already connected to the machine and ready to run. This ...
Thunder Nova Plus Camera Information, Calibration and Setup
Preface: This article covers information about setting up your Thunder Nova Plus Lid camera. Please note that we do not currently have documentation for the calibration procedure in Lightburn V2.1.xx. You will need to follow the standard Lightburn ...
Nova Plus 60w Fan Power and Speed Control Wiring Change
Preface: This article covers the steps for changing the wiring on the NOVA Plus for the affected machines. Before performing this operation, ensure that the power supply of the device is completely cut off. Unplug the machine from the wall power and ...