Using U-Disk With Thunder And LightBurn

Using U-Disk With Thunder And LightBurn

Preface: This article covers using a USB stick with your Thunder Laser Nova and Odin machines with Ruida controllers.

Reference Video:



Troubleshooting if the Ruida Will Not Read:


    • Related Articles

    • U Disk Not Recognized by the DSP

      Problem description: The machine cannot recognize the U-disk, and LCD panel show no U-File when you choose Read U-disk file. Reasons: 1. The U disk selection error The U disk can be recognized by machine: Disk capacity:16G(including 16G and below) ...
    • LightBurn Material Test File

      Preface: The article covers some pre-made material test cards and the built in Lightburn Material Test Generator for CO2 lasers like the Thunder Laser Bolt, ODIN and Nova machines Quick Start Videos: New Style Test Cards Lightburn Material Test Video ...
    • The Lightburn License - Everything you need to know about it

      Note that there are changes coming to the Lightburn License Structure that will go into effect Oct 1, 2024 which will make some of the information in this article moot. Please read about it here. Lightburn License Overview: New Thunder Laser NOVA and ...
    • Aurora Installing Lightburn (non-Pro)

      Preface: This article covers installing Lightburn for your Thunder Laser Aurora Galvo laser Lightburn Software for Galvo is a powerful design and communication tool for your Thunder Galvo Laser. Following this guide will help you install Lightburn, ...
    • Using SHX Fonts with LightBurn

      you can find the official documentation here https://docs.lightburnsoftware.com/UI/FontsAndText.html#shx-fonts you can get a repo of fonts here: https://forum.lightburnsoftware.com/t/shx-font-collection/25298 unzip the folder and put it somewhere ( i ...
    If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!