Uncrating Your Thunder Laser

Uncrating Your Thunder Laser

Uncrating your new Thunder Laser is fairly straightforward, you will need a few tools to make this happen. 

NOTE: The leveling casters are nailed to the pallet, you must pry the wood off them and RAISE them, if you leave them down

you take the chance of bending them .

1. Philip Screw Driver
   
2. Pry Bar
   
3. Car Jack(floor jack)
   
4. Some helpful friends
   

Here are a few videos showing the process some of our clients used to uncrate. 

​

 

• Related Articles

• How to Align your Thunder Laser Nova Series machine - Quick Start Alignment Guide

  Preface: This article covers How To align your laser beam in a 3 mirror gantry based Nova laser. Here are some quickstart videos that will cover 90% of the situations. They do not contain every last iota of detail but should be enough to get most ...

• Thunder Laser Training Academy

  Thunder Laser USA Training Academy Thunder Laser Training Academy is a go at your own pace learning series. Getting you setup and lasering in no time! Unboxing and Setup Making your first project on your laser in Lightburn How to with accessories ...

• Thunder Laser Approved Antifreeze

  UPDATE: As of November 2022 Thunder Laser China has approved pink RV antifreeze for use in Thunder Laser USA Nova series machines RV ANTIFREEZE You can now use pink RV Antifreeze the same as, or equivalent to, the product linked below in Thunder ...

• Thunder Laser USA Supply Chain

  Overview: Thunder Laser USA utilizes multiple sources to get the physical and soft goods to provide a finished product. The information below details out more information about each type of item and where they come from Hardware Items: Machines, ...

• Used Thunder Laser Inspection & Valuation

  Overview We still support quite a few MARS series and older Nova machines and they still perform just as well as current machines, minus some of the innovation (dual stage air, door interlock board, etc...). Thunder Laser still maintains many, if not ...