Titan Exhaust Specifications
The Titan series uses a 6" Exhaust from the CY series:
Related Articles
Plug Adapters for External Exhaust Fans and Stock Compressor
Preface: This article covers information about the different plugs, sockets and adapters used for the stock exhaust and air pump power connections. About the Exhaust Fan and Air pump socket: The back of your Thunder Laser machine has C14 socket to ...Venting The Exhaust From Your Thunder Laser
Preface: This article covers some key points about Venting Your Laser and adapting aftermarket exhaust components Important Considerations: Existing Systems Do not connect the exhaust output of this laser to an existing exhaust system. Please consult ...Thunder Laser Titan and Titan Pro Machine Series User Manual
Download the Manual June 2025Aurora V2 Exhaust
HF-100PE Exhaust Details: Nominal 4" exhaust, OD of exhaust flanges is ~96mm DESCRIPTION Product Detail : HF-100PE 4 inch is Direct drive and dust-free: suitable for clean rooms in microelectronics, food and medical industries. It comes with with ...Titan: External Device Control - Air Pump, Exhaust and vacuum table
Preface: The Titan series supports the function of setting the start delay and end delay of the built in exhaust fan and air pump. It optimizes the engraving effect and ensures operational safety through airflow timing control. These values are in ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.
Information contained in this Knowledgebase, on this page, in this or any other Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.