Thunder Laser Nova Plus Zamia SPT ET-60 RF Laser Tube Manual
Preface: Please see the attached manual for the 60W RF Tube in the Nova Plus machines
Related Articles
Thunder Laser RF Tube and Fan Control Board Ports and LED Indicators for Troubleshooting
Preface: This article is high level information about the Fan Board ports and indicators and troubleshooting based of the visual observations. It is very technical Fan Board Layout: Fan Board Designations Fan Board Wiring Connections Port ...Nova Plus Beeping constant beep remedy
Preface: This article covers the steps to remedy the constant beeping on your Nova Plus machine No matter which method you choose, you must allow the RF laser tube time to initialize. After turning on the laser switch, please allow for 60 seconds. If ...Thunder Laser Nova PLUS RF Machine User Manual
Please see the attached manual for the Thunder Laser Nova Plus Machines with RF tubes.Nova Series Users Manual
Note that the manual is Windows and RDworks centric due to being the GLOBAL manual. Thunder Laser USA has compiled information on Lightburn, Windows and MacOS in this knowledgebase that should be considered. For Thunder Laser USA support please email ...Thunder Laser Bolt and Bolt Plus Unified User's Manual
Please see the manual for the Thunder Bolt and Bolt Plus below. Note that the manual is Windows and RDworks centric due to being the GLOBAL manual. Thunder Laser USA has compiled information on Lightburn, Windows and MacOS in this knowledgebase that ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.
Information contained in this Knowledgebase, on this page, in this or any other Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.