Thunder Laser Bolt Series Critical Spare Part Recommendations
This article discusses spare parts needs for your Thunder Laser
machine, you must verify all part numbers for your existing part. Links may
change, expire outside of our control.
If your laser is your business and down time is not acceptable while you
wait on spare parts, then the following are recommended (Below are
links to purchase and/or tech articles related to each subject):
OPTICS:
Mirrors:
Mirrors are a consumable and will greatly affect your power output if they are dirty or failed. For the Bolt series, the mirrors come pre-set in the aluminum tray for mirror location 1 & 2 and a loose mirror for location 3.
Reference Picture
Lens:
Lens are a consumable and will greatly affect your power output if they are dirty or failed. For the Bolt series, the lens come pre-set in the aluminum tray.Lens Ecom Links:
Electrical:
Power Supplies:
The Bolt series has three AC-DC power supplies. One for Tube, One for the Control circuits X/Y Drivers and One for the Z/Rotary Drivers.
Motors Drivers:
Oriental motor: These will be on the older Bolt machines, visually inspect your model before purchasing.
Leadshine motor: These will be on the newer Bolt machines, visually inspect your model before purchasing.
Sensors and Control Components:
Location
(Take note of your brand, Hialeah VS Sensen, the output fitting may change between models)
Mechanical: