Thunder Laser Bolt and Odin Lens Kit assembly Guide
Preface: This article covers how each of the 4 lens kits should be assembled so that they fit in the laser head properly.
Related Articles
How to Align your Thunder Laser Nova Series machine - Quick Start Alignment Guide
Preface: This article covers How To align your laser beam in a 3 mirror gantry based Nova laser. Here are some quickstart videos that will cover 90% of the situations. They do not contain every last iota of detail but should be enough to get most ...Thunder Laser Bolt Series Included Parts in tool pouch
Preface: Here is more information on what is included in the tool pouch of your Thunder Laser Bolt Laser Machine Quick Start Video: Complete List: 1. Main power cord 2. USB PC Cable 3. Ethernet Cable 4. Lens Cleaning Swabs 5. Dust Blowing Ball 6. ...How to check and Adjust the X and Y Axis Endstops on a Thunder Laser Bolt Series Machine
Preface: This article contains information on how to the check the function of the Thunder Bolt Endstops and how to adjust them Quick Start Video: Complete Guide: This guide aims to cover how to check a Bolt X or Y Endstop for function, how to adjust ...How to use the Alignment (Pulse) Screen on the Thunder Laser Bolt
Preface: This article covers how to use the Alignment (Pulse) Screen on the Thunder Laser Bolt Quickstart Video: Complete Guide: The Alignment screen can be accessed from the MENU section of the Bolt Laser Touch Screen. Once you have accessed the ...How to adjust the 48V 30W RF Tube Power Supply Voltage for a Thunder Laser Bolt
Preface: This article covers how to adjust the 48V power supply voltage for the Thunder Bolt DC 30W RF tube. Power must be on the machine and the Laser must complete the startup sequence. This procedure requires work to be done near live voltage. ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!