Thunder Laser Aurora Lite 50W Galvo Material Library

This information is provided “AS IS” to provide a starting point. It is always a good idea to run tests on each substrate and update the library as necessary.

The Official Thunder Laser USA Material Library file is linked here.

Here is short tutorial on how to upload the .clb file into LightBurn: Uploading the LightBurn Materials Library

• Related Articles

• Aurora Installing Lightburn (non-Pro)

  Preface: This article covers installing Lightburn for your Thunder Laser Aurora Galvo laser Lightburn Software for Galvo is a powerful design and communication tool for your Thunder Galvo Laser. Following this guide will help you install Lightburn, ...

• Material Libraries and Safe/Unsafe Resources

  Machine Material Library Located below you will find our machines and their associated library. Click the link to download and install the Lightburn Library for your machine wattage. These material settings will help you fine tune your cutting and ...

• LightBurn For Galvo Crash Course

  The wait is over on June 30th Galvo Support for EzCad 2 and EzCad 2 Lite devices come with the LightBurn Software 1.2 release. On top of Galvo support, 1.2 comes with a number of new features including: Sub-Layers Device Linked Libraries Head-Mounted ...

• LightBurn Material Test File

  Preface: The article covers some pre-made material test cards and the built in Lightburn Material Test Generator for CO2 lasers like the Thunder Laser Bolt, ODIN and Nova machines Quick Start Videos: New Style Test Cards Lightburn Material Test Video ...

• How to calibrate the Focal Distance on a Thunder Aurora 1.0 Pro or Aurora 2.0 Galvo Laser with Windows

  Preface: This article covers the use of the Thunder laser auto focus software and some of the basics of setting up the new Lens in EzCad3 or Lightburn. It does not cover the topic of finding the optimum focal distance. Quick Start Video: Complete ...