Thunder Laser Aurora Galvo Focus Height Software
This is the software used for Aurora 2.0 machines and the Pro Aurora 1.0 machines that have Feeltek Scanning heads.
You must have a Thunder Laser AF Board and not a Sino-Galvo AF board to use this software.
Instructions can be found in the Aurora V2.0 Unified manual, starting near page 48 (Chapter 6 starts on page 45 to cover the install):
Snippet from the manual:
Operating Requirements:
Windows 10/11 OS
May not work on MAC Bootcamp, Parallels type emulation
Not Mac OS Compatible
Related Articles
How to calibrate the Focal Distance on a Thunder Aurora 1.0 Pro or Aurora 2.0 Galvo Laser with Windows
Preface: This article covers the use of the Thunder laser auto focus software and some of the basics of setting up the new Lens in EzCad3 or Lightburn. It does not cover the topic of finding the optimum focal distance. Quick Start Video: Complete ...Aurora Installing Lightburn (non-Pro)
Installing and Configuring Lightburn for Galvo. QUICK START VIDEO Lightburn Software for Galvo is a powerful design and communication tool for your Thunder Galvo Laser. Following this guide will help you install Lightburn, install important drivers ...Aurora Series Unified User's Manual
Please see the manuals for both Aurora series V1 and Aurora series V2 attached belowThunder Laser Aurora Fiber Galvo
AURORA 8 comes with 20w standard fiber laser source, 110x110mm field lens, EZCAD2 controller/ software as standard. Customers can choose optional 150x150mm and 200x200mm lenses if needed. AURORA 8 PRO comes with 20w MOPA laser source (or 50W fiber), ...LightBurn For Galvo Crash Course
The wait is over on June 30th Galvo Support for EzCad 2 and EzCad 2 Lite devices come with the LightBurn Software 1.2 release. On top of Galvo support, 1.2 comes with a number of new features including: Sub-Layers Device Linked Libraries Head-Mounted ...