Thunder Laser 2" Head Focus Tool File
See below for the LightBurn file for the Nova Focus Tool. Be sure to check the scale and power & speed settings.
Related Articles
Thunder Laser USA Beam Buddy HR Head Information & Instructions
Description Our Thunder Laser USA Beam Buddy High Resolution Head is manufactured in Canada to our specifications and this head performs a bit better than the stock Thunder HR Head. More on that here: ...How to Align your Thunder Laser Nova Series machine - Quick Start Alignment Guide
Preface: This article covers How To align your laser beam in a 3 mirror gantry based Nova laser. Here are some quickstart videos that will cover 90% of the situations. They do not contain every last iota of detail but should be enough to get most ...How to calibrate and use the manual focus on the Thunder Laser Aurora Lite Laser
Preface: This article covers how to calibrate the manual focus T-Bar and how to use the red dot focusing tool for your Aurora Lite Laser Quick start Video:Stepped Focus Tool
Mark Lazarz, an active Thunder Laser user and owner of markswoodchips.com, developed this focus tool with stepped graduations.Thunder Laser Bolt Series Included Parts in tool pouch
Preface: Here is more information on what is included in the tool pouch of your Thunder Laser Bolt Laser Machine Quick Start Video: Complete List: 1. Main power cord 2. USB PC Cable 3. Ethernet Cable 4. Lens Cleaning Swabs 5. Dust Blowing Ball 6. ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!