testing h5p interactive elements

You can click the icon indicated below to close the sidebar to reveal the entire slide area:

click the images in the instruction below to view full size

You can close the sidebar  or view the content full screen.

Click the right arrow at the bottom to advance the slide when prompted .

The proceed button is green and in the upper right  .

Nova Series No Power Interactive  Diagnostic

image hotspots

• Related Articles

• Recommended Testing & Maintenance Equipment

  Safety First Injury, death, loss of property, fire, electric shock, malfunction, reduced performance & machine life, and critical failures can result from not reading, understanding, and following the Operation Manual. Example Excerpt from Nova ...

• Sample Testing Gravoply Ultra 2 Color Board With Nova & Odin

  Nova 35-80w Testing: Cutting air inlet pressure at 27psi. Stock 2” head with 6mm focus. Cuts and Engraves were performed at stock focus. *Note that for speed comparisons, a Odin 32 60watt will be able to cut faster than the 30w Odin 22 but it will ...

• Testing Z Axis Endstops

  Preface: This article covers the steps to check the basic functions of the Z Axis endstops on a Thunder Laser Nova Series machine Quickstart Video: Complete Guide: Background: The Z axis is the only axis to use two endstops on your thunder laser. The ...

• Testing Marking Compounds on a Nova 35-80

  We have a discount code for Brilliance. Use code THUNDER to get 10% off

• Testing/Adjusting Peripheral Systems using The TL Timer

  Here is the schematic diagram for the V8 (8 channel) TL-Timer: Nova Series DSP TL Timer V8 2019 Block Diagram The Channels are as follows: 01 - Green Lamp 02 - Red Lamp 03 - Exhaust 04 - Low Air 05 - High Air 06 - Alarm 07 - Rotary Power 08 - N/A ...