Stepped Focus Tool
Mark Lazarz, an active Thunder Laser user and owner of markswoodchips.com, developed this focus tool with stepped graduations.
Related Articles
How to calibrate and use the manual focus on the Thunder Laser Aurora Lite Laser
Preface: This article covers how to calibrate the manual focus T-Bar and how to use the red dot focusing tool for your Aurora Lite Laser Quick start Video:Thunder Laser 2" Head Focus Tool File
See below for the LightBurn file for the Nova Focus Tool. Be sure to check the scale and power & speed settings.How to Manually Focus
Manually Focusing Your Laser While the autofocus is convenient there are many reasons to manually focus.. In many cases it is quicker and sometimes even more accurate than using Autofocus. The following video will walk you through how to manually ...Thunder Laser Bolt Series Included Parts in tool pouch
Preface: Here is more information on what is included in the tool pouch of your Thunder Laser Bolt Laser Machine Quick Start Video: Complete List: 1. Main power cord 2. USB PC Cable 3. Ethernet Cable 4. Lens Cleaning Swabs 5. Dust Blowing Ball 6. ...How to install TL Auto Focus Software on a Mac Computer
Preface: This article is a rough draft of the instructions at the software is a new release. Quick Start Video: Complete Guide: 1.NOTE:we need to install the driver (CH34xVCPDriver.app) before using the Auto Focus software (autofocus.app).. ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.
Information contained in this Knowledgebase, on this page, in this or any other Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.