Ruida DSP LED Status Indicators
The status LED legend is screen printed onto the case.
Related Articles
How to Swap a GCode License to DSP for Lightburn
Preface: This article covers how to check if you have a DSP License installed and how to swap from a GCode License to a DSP License Note that there are changes coming to the Lightburn License Structure that will go into effect Oct 1, 2024 which will ...Thunder Laser RF Tube Fan Control Board Ports and Indicators for Troubleshooting
Preface: This article is high level information about the Fan Board ports and indicators and troubleshooting based of the visual observations. It is very technical Fan Board Layout: Fan Board Designations Fan Board Wiring Connections Port ...Ruida RDC644XG Controller User Manual
Ruida RDC644XG Controller User ManualWhat do the Red LED Lights on the Ruida Controller Mean for Nova and Odin Lasers
Preface: This article covers what the Red LED Lights on the Ruida controller mean and some basic information about them. Just because you see a red light on, off or blinking, it does not necessarily mean that there is an issue. Red Led Lights on ...Seven Red Flashing LED Lights on X or Y Driver on a Nova Series Laser and Laser Won't Move
Preface: This Article Covers what to check if you are getting seven Red Leg Light Flashes on your X or Y driver on a Nova series laser machine The basic premise is that something is causing the Driver to not be able to move the laser head due to ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!