A client wanted some assistance setting up a rubber stamp file. The original LightBurn file as well as the fixed file are attached to this article for your reference. Power, speed, ramp, etc... will still need to be modified.
A client with a Nova 24-60 is needing to fine tune his settings for rubber stamps. These tests are performed on a Nova 35-80 but the 20 Watt differential can be factored in. I used an untouched .lbrn file, provided by the client, that has proven to ...
Preface: This article will guide you to success with your Thunder Chuck Rotary. NOTE* There are a few style Chuck rotary available through Thunder Laser, Please check HERE to verify yours! If different your steps may vary. Chuck Rotary Setup in ...
Roller Rotary Setup in Lightburn In Lightburn's top menu options click Laser Tools. The drop down menu will show Rotary Setup. Click this option to expand the Rotary Setup window. Follow the steps to set up your Roller rotary. Select Roller Rotary ...
Chuck Rotary Setup and Usage in Lightburn (Nova/Odin) The following article, supported videos and images will guide you to success with your Thunder Chuck Rotary. NOTE* There are a few style Chuck rotary available through Thunder Laser, Please check ...
Preface: This article covers a sample setup and workflow for a Tumbler on EzCad3 using a Roller Rotary on an Aurora Pro 20W Mopa Fiber Laser. This article assume you know the marking parameters(hatching, power, freq) etc for the tumbler you have. You ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!