RD Works For Thunder Laser

RD Works For Thunder Laser

If you are having issues with RDworks you may want to uninstall and re-install the Thunder flavor RDWorks. Here is how:

UNINSTALL:

Use the Windows "Install or Remove" program feature to remove installed version of RDworks


You may also try this:  https://www.revouninstaller.com/products/revo-uninstaller-free/


INSTALL:


Download the folder of RdWorks:



Use the Download Link in the top Right. The server will Zip and download the entire folder.





Drawing Unit Selection:

When installing, be sure to check which units you want to use, it cannot be changed after the install)



Also, you may want to explore LightBurn if you are interested in a better replacement for RdWorks:

LightBurn Software


Windows USB Driver Install Issue:

If the USB driver does not seem to install properly (you may not get a warning during the install) then you may need to disable the Memory Integrity in windows and re-run the installer.



    • Related Articles

    • How to Align your Thunder Laser Nova Series machine - Quick Start Alignment Guide

      Preface: This article covers How To align your laser beam in a 3 mirror gantry based Nova laser. Here are some quickstart videos that will cover 90% of the situations. They do not contain every last iota of detail but should be enough to get most ...
    • How The Chuck Rotary Works

      Preface: This article covers how a Chuck Rotary works with a Thunder Laser Quick Start Videos: Complete Guide: The Chuck rotary is pretty basic to operate. You need to know the Steps per rotation of the chuck and then your objects ...
    • Venting The Exhaust From Your Thunder Laser

      Preface: This article covers some key points about Venting Your Laser and adapting aftermarket exhaust components Important Considerations: Existing Systems Do not connect the exhaust output of this laser to an existing exhaust system. Please consult ...
    • Thunder Laser Training Academy

      Thunder Laser USA Training Academy Thunder Laser Training Academy is a go at your own pace learning series. Getting you setup and lasering in no time! Unboxing and Setup Making your first project on your laser in Lightburn How to with accessories ...
    • Uncrating Your Thunder Laser

      Uncrating Your Thunder Laser Uncrating your new Thunder Laser is fairly straightforward, you will need a few tools to make this happen. NOTE: The leveling casters are nailed to the pallet, you must pry the wood off them and RAISE them, if you leave ...
    If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!