Nova Series Bearings

We are going to stock bearings for sale on our onliine shop soon, but for now we have a link to a US source

https://www.vxb.com/SG15U-U-Groove-Sealed-Track-Ball-Bearing-5x17x8-p/sg15u.htm

SG15U U-Groove Sealed Ball Bearing
5mm x 17mm x 8mm
One Bearing

d	D	C	W	dw	d2	H	L
5mm	17mm	8mm	9.75mm	6mm	8.6mm	1mm	20.46mm

SG15U U groove sealed ball bearing size 5mm x17mm x8mm. Each bearing has 2 Rubber Seals to protect the bearing from dust or any possible contamination. The bearing is pre-lubricated with grease.

• Item: SG15U U GROOVE Ball Bearing
• Type: Deep Groove Ball Bearing
• Size: 5mm x 17mm x 8mm
• Inner Diameter: 5mm
• Outer Diameter: 17mm
• Width: 8mm
• Material: Chrome Steel
• Closures: 2 Rubber Seals
• Quantity: One Bearing

Alternate Bearing Link:

Cloudray Machine Mechanical Parts SG U Bearing – Cloudray Laser

Shoulder Bolt Specifications:

Shoulder diameter: 5mm

Shoulder Length: 9mm

Thread Pitch:M5x.08

Thread Length: 11mm

• Related Articles

• Linear Bearings vs. Thunder Roller Bearings

  Typical Exposed Linear Guide and Bearing Many CO2 gantry lasers use linear guides which require periodic maintenance and lubrication. Most are exposed like the image above and collect dirt and debris. Maintaining them can be fairly intensive ...

• Nova Series Users Manual

  For Thunder Laser USA support please email support@thunderlaserusa.com

• Nova Series Technical Specifications

  Here are the Nova Series Specs. They can also be found in the Nova Series Users Manual.

• Critical Spare Part Recommendations for NOVA series machines

  This article discusses spare parts needs for your Thunder Laser machine, verify all part numbers for your existing part. If your laser is your business and down time is not acceptable while you wait on part deliveries, then the following are ...

• Nova Series LPSU Replacement

  Preface: This article will cover Laser Power Supply replacement on Thunder Laser Nova series machines. Before we begin: The LPSU outputs somewhere around 30,000 VDC and can store a charge so always heed the big red wires and connectors. They are ...