Nova Series Bearing Replacement

• Related Articles

• Nova Series LPSU Replacement

  Preface: This article will cover Laser Power Supply replacement on Thunder Laser Nova series machines. Before we begin: The LPSU outputs somewhere around 30,000 VDC and can store a charge so always heed the big red wires and connectors. They are ...

• Nova Series Users Manual

  Note that the manual is Windows and RDworks centric due to being the GLOBAL manual. Thunder Laser USA has compiled information on Lightburn, Windows and MacOS in this knowledgebase that should be considered. For Thunder Laser USA support please email ...

• Nova Series X and Y Endstop Tests, Adjustment and Replacement

  Preface: The information below will cover testing the X and Y endstops to troubleshoot X or Y axis motion issues on your Thunder Laser Nova Series machine. This article includes where to source replacement endstops and additional resources are linked ...

• Thunder Laser Nova Series: Checking And Adjusting Bearing Tension

  Preface: This article covers two methods on how to adjust bearing tension. Both methods are done with the power off to the machine. Your machine may have 2 set screws for the bearing. Be sure to loosen and tighten both for adjustments. Method 1: ...

• Thunder S&A 5000 series V1 & V2 Cooling Fan Replacement Procedure

  Disconnect the equipment from the main power before performing this repair. Be careful of sharp edges and screw points. You will need a #2 Philips head screwdriver and something to snip a wire tie or 2, and a few wire ties to replace the ones snipped ...