Nova Series Beam Combiner Orientation
Preface: This article covers the marks used to indicate the direction of the beam combiner orientation.
THE ORIENTATION OF THIS LENS MATTERS. There is an arrow on the side of the optic that indicates the direction the CO2 beam should pass through. Make sure you take lots of pics and observe part and optic orientation. | |
Cloudray Mark:
Related Articles
Nova Series Users Manual
For Thunder Laser USA support please email support@thunderlaserusa.comThunder Laser Beam Waist Matrix
This data is assuming all stock machines with proper optics/alignment/focus... etc... Nova Series The Nova series machines have DC excited watercooled glass tubes. The beam diameter in the near field is somewhere around 1/4" across SPT and Reci tubes ...Inspecting and Cleaning Nova Series Optics
Preface: This article covers how to clean your optics on your Thunder Nova Series Laser Lenses Explained Quick Start Video: (Video Credit: Robert Kofoed of Computer Creationz) Complete Guide: Before you Begin: Cleaning your optics can help keep your ...Critical Spare Part Recommendations for NOVA series machines
This article discusses spare parts needs for your Thunder Laser machine, verify all part numbers for your existing part. If your laser is your business and down time is not acceptable while you wait on part deliveries, then the following are ...The Usual Suspects and Preparing For Your 1 Hr. Training
Preface: The Usual Suspects are the things that most commonly get overlooked or are incorrect that can burn up training time on things that should already be checked and if not mastered. If you choose to not follow this guide you will likely ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you!