Nova Series Auto Focus 101

Nova Series Auto Focus 101


Also be sure to see our head overview article: Nova Series Overview - Heads, Optics, Focus


    • Related Articles

    • Best Practices for using Auto Focus on a Nova Series Machine

      This article covers the best practices for using Auto Focus on your Nova Series machine. When to NOT use Auto Focus: 1. Rotary jobs - The shape of the rotary machine and tumblers do not work with the sensors 2. If not using the stock 2" head. Auto ...
    • Nova Series Overview - Heads, Optics, Focus

      This is an overview on the Thunder Laser USA Nova series head, optics, focus, etc... And be sure to have a look at how to use the Auto-Focus: Nova Series Auto Focus 101
    • Nova Series Users Manual

      Nova Series Users Manual Note: this manual is distributed globally and has Thunder Laser China's contact information in it. For Thunder Laser USA support please email support@thunderlaserusa.com
    • Nova Series Included Parts

      Overview Here is what is included with your Thunder Laser Nova series. Tools may be substituted and not look exactly as what is shown below. See the attached PDFs for legacy info. Parts List 1. Focus Gauge Ensure correct focus between laser head and ...
    • The Basics Of Focus

      This data is specific to Thunder Laser Nova Series head assemblies but the principle applies to most chinese gantry CO2 lasers. Here is more on how the ThunderCAM plays well with autofocus to maintain correct calibration: NOTE: If you do not have or ...