Nova 51 vs. Glowforge Time Comparison by Spin Customs
From Darryl Aspin with Spin Customs Laser Designs:
Hey all. As many of you know I bought a Thunder Nova 51 to add to my little shop of the 2 Glowforges I have. I Got it all set up and working a couple nights ago and have been playing around with it. I still have some work to do on settings and stuff to learn, but right away I was blown away at how fast it is. I decided to run a test on exact same material and exact same file to compare it to my Glowforge. Using my monogram design of course. HAHAHA.
Glowforge: 12 minutes and 20 seconds
Thunder: 3 minutes and 11 seconds
Made a side by video of them both.
Nova Series Users Manual
For Thunder Laser USA support please email firstname.lastname@example.org
Dot Test-2” vs. Thunder HR vs. US-HR (Beam Buddy)
Stock 2" Head vs. Stock Thunder Laser HR Head Stock 2" Head Stock Thunder Laser HR Head Stock Thunder HR Head vs. USA Beam Buddy HR Head Stock Thunder HR Head USA Beam Buddy HR Head Dot Size Comparison Air Blowing Result Testing by Thunder Laser ...
Sample Testing Gravoply Ultra 2 Color Board With Nova & Odin
Nova 35-80w Testing: Cutting air inlet pressure at 27psi. Stock 2” head with 6mm focus. Cuts and Engraves were performed at stock focus. *Note that for speed comparisons, a Odin 32 60watt will be able to cut faster than the 30w Odin 22 but it will ...
Nova Series Getting Started
Welcome and Introduction: So you just bought a new Thunder Laser? Now you are thinking "What's next?", that is what this guide is for. Be sure to use the Table of Contents to the right to follow the flow and to pick up back where you left off. This ...
DC vs RF vs Fiber Deep Engrave Resolution On Stone
THIS DOCUMENT IS IN PROCESS. CHECK BACK OFTEN! This was my first time using the multi-cam 'live production' workflow with a remote so please excuse my excessive use of 'uh' as well as all of the other hiccups :) This test will be done on stone ...