Nova 24 Stand Options
Most people have chosen to use what they have on hand or fabricate their own stand. Here is more on these builds:
Robert gives his dimensions and details for his stand here:
Jay made one from a few pallets and the machine crate in less than an hour:
Asim used Rockler's cart system found here:
https://www.rockler.com/rockler-customizable-shop-stand
And here is what Jordan did:
Related Articles
Nova Series Users Manual
Nova Series Users Manual Note: this manual is distributed globally and has Thunder Laser China's contact information in it. For Thunder Laser USA support please email support@thunderlaserusa.comPreventing Adjustable Foot Damage on Nova Series Machines
The freestanding Nova Series machines (Nova 35, 51, and 63) all have 4 heavy duty casters for easy rolling, as well a 4 adjustable feet used secure and level the unit in place. These feet can become damaged during the unboxing and setup procedure if ...Getting Nova Series Machines Through A Standard 30" Doorway
The Users Guide section will walk you through 6 steps for learning how to disassemble your Nova Note: There’s glass laser tube inside the laser machine, be careful and do not collide with anything when moving. Please do as following: 1. Remove the ...Chuck Rotary Setup and Usage in Lightburn (Nova/Odin)
Chuck Rotary Setup and Usage in Lightburn (Nova/Odin) The following article, supported videos and images will guide you to success with your Thunder Chuck Rotary. NOTE* There are a few style Chuck rotary available through Thunder Laser, Please ...Nova Series Technical Specifications
Here are the Nova Series Specs. They can also be found in the Nova Series Users Manual.