Mislabeled Lens Cleaner & Lubricating Oil In Some ToolBoxes

It has been discovered that the labels for the lens cleaner and the lubricant were accidentally swapped in an unknown lot of tool boxes

Please be aware of this. Please contact us if you have any issues or questions. Sorry for any trouble. 

• Related Articles

• Thunder Laser Bolt and Odin Lens Kit assembly Guide

  Preface: This article covers how each of the 4 lens kits should be assembled so that they fit in the laser head properly.

• How to identify the Lens on your Aurora Fiber Laser whether it is F-160 F-210 or F-290 for 110x110, 150x150 or 200x200mm working area

  Preface: This article covers how to determine which lens you have installed on your Aurora Fiber Laser Visual Marking: Look for the F-### on the lens. It should be either F-160, F-210 or F-290. Basic specs for each lens: Focal Distance Specs for Each ...

• How to clean and lubricate the Rails and Z Bed Screws on your Thunder Laser Nova Series machine

  Preface: This guide is for Nova Series Lasers with Roller Bearing Type rails, not linear guides Lubrication for Rails and Screws The mechanical rails and rods (Z-screws) should be cleaned of debris (bearing races too) and then re-apply lubrication. ...

• Manual Aurora Lens Calibration In LightBurn

  Manual Calibration Method: 9 Point Correction Wizard Tutorial: Additional References: Lightburn documentation

• Inspecting and Cleaning Nova Series Optics

  Preface: This article covers how to clean your optics on your Thunder Nova Series Laser Lenses Explained Quick Start Video: (Video Credit: Robert Kofoed of Computer Creationz) Complete Guide: Before you Begin: Cleaning your optics can help keep your ...