Preface: This article covers the basics of preparing your Nova Series machine for Pass Through Print and cut. Currently this article is a WIP and a collection of data. Quick Start Video: *coming soon* Complete Guide: What is Print and Cut: Print and ...
Manually Focusing Your Laser While the autofocus is convenient there are many reasons to manually focus.. In many cases it is quicker and sometimes even more accurate than using Autofocus. The following video will walk you through how to manually ...
Preface: The goal of this article is to walk you through how to set your ThunderCam or built in camera up for the best image prior to calibrating and aligning it. This article was written using a Nova 35 and W85 ThunderCam but the same concept ...
This article covers the best practices for using Auto Focus on your Nova Series machine. When to NOT use Auto Focus: 1. Rotary jobs - The shape of the rotary machine and tumblers do not work with the sensors 2. If not using the stock 2" head. Auto ...
Preface: This articles covers some of the things that should be considered when installing a Thunder Laser into a work or school environment that has IT controls in place If you plan to install your machine at work or in an education environment that ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.
Information contained in this Knowledgebase, on this page, in this or any other Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.