Low Roller Stemmed Glassware

• Related Articles

• Roller Rotary Setup and Usage in Lightburn (AURORA)

  Roller Rotary Setup in Lightburn In Lightburn's top menu options click Laser Tools. The drop down menu will show Rotary Setup. Click this option to expand the Rotary Setup window. Follow the steps to set up your Roller rotary. Select Roller Rotary ...

• Rotary Roller Diameter Calculation

  Preface The Roller Rotary differs from a chuck rotary since it provides rotation by surface contact. A chuck rotary is locked into a degree of rotation of the chuck is a degree of rotation of the object and generally do no have adjustment for surface ...

• RotoBoss Roller Rotary Setup

  Preface: This Article covers how to set up the rotary to get your steps right for a given tumbler and some best practices. This article is relevant for Thunder Laser Gantry style Lasers with Ruida Controllers. The information contained in here is not ...

• Aurora Pro EzCad3 Roller Rotary Setup and Workflow for Tumbler Marking

  Preface: This article covers a sample setup and workflow for a Tumbler on EzCad3 using a Roller Rotary on an Aurora Pro 20W Mopa Fiber Laser. This article assume you know the marking parameters(hatching, power, freq) etc for the tumbler you have. You ...

• Linear Bearings vs. Thunder Roller Bearings

  Typical Exposed Linear Guide and Bearing Many CO2 gantry lasers use linear guides which require periodic maintenance and lubrication. Most are exposed like the image above and collect dirt and debris. Maintaining them can be fairly intensive ...