LoneStar Adhesive Material Tests

LoneStar Adhesive Material Tests

Preface: This article covers how to perform material tests on LoneStar materials on your Thunder Laser

LoneStar Adhesive Material

Dialing in settings for different materials can be a chore. Thunder Laser and LoneStar Adhesive want to make things a little easier for you. The video below along with the attached Lightburn Material Test files hope to help you quickly dial in your settings on your Thunder Laser and save material and hours of testing. 

How to Video:




Lightburn Material Test Files:

Use the files below to perform the testing on the material. Download the file, import the file into the Lightburn Material Tester Tool and then run the test file.

CO2 Tube Type
Leatherette
Multi-Layer
Silicone
Glass (Nova series)
Silicone Glass Tube Test
RF (Odin, Bolt and Nova Plus)
Silicone RF Tube Test

    • Related Articles

    • LightBurn Material Test File

      Preface: The article covers some pre-made material test cards and the built in Lightburn Material Test Generator for CO2 lasers like the Thunder Laser Bolt, ODIN and Nova machines Quick Start Videos: Thunder Material Test Lightburn Material Test ...
    • Legacy Lightburn Material Test File

      Preface: The article covers some pre-made material test cards and the built in Lightburn Material Test Generator for CO2 lasers like the Thunder Laser Bolt, ODIN and Nova machines Quick Start Videos: Legacy Material Test Cards Lightburn Material Test ...
    • Material Libraries and Safe/Unsafe Resources

      These libraries are for Thunder Laser customers only. Use by non Thunder Laser customer's is prohibited. Machine Material Library Located below you will find our machines and their associated library. Click the link to download and install the ...
    • Thunder Laser Aurora Lite 50W Galvo Material Library

      This information is provided “AS IS” to provide a starting point. It is always a good idea to run tests on each substrate and update the library as necessary. The Official Thunder Laser USA Material Library file is linked here. Here is short tutorial ...
    • Nova Laser Tube Will Not Fire or is Low on Power- LPSU Test

      Preface: This article covers the "Red Button Test" which is a great first test when you have Laser Power issues. The red button test eliminates the OPTO and RUIDA inputs, isolating the system to just the tube and the LPSU. If this test is a success, ...
    If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.

      Information contained in this Knowledgebase, on this page, in this or any other  Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.