Lightburn Material Test File Card

LightBurn Material Test File





It is important that you do not adjust ANY settings when using files generated for LightBurn using the power scale feature or the results will not be correct.



THIS IS A GREAT RESOURCE. YOU MAY WANT TO HAVE A LOOK IN HERE:

https://www.o2creative.co.nz/laser/




OLD File Preview:


New file Preview: (notice the difference on the 10mms and 5mms cut rows)
                                                                       





Here is more from LightBurn on material test cards:

https://forum.lightburnsoftware.com/t/material-cut-scan-test-files-power-scale/436


And a tutorial on power scale:




THIS IS A GREAT RESOURCE. YOU MAY WANT TO HAVE A LOOK IN HERE:

https://www.o2creative.co.nz/laser/

Rotary Material Test File:


Rotary File is Engrave Only and is set to run from 200-600mms and 15 to 70pct power




Starting with Lightburn Version 1.1.00, a new material test generator is included in Lightburn:






    • Related Articles

    • LightBurn For Galvo Crash Course

      The wait is over on June 30th Galvo Support for EzCad 2 and EzCad 2 Lite devices come with the LightBurn Software 1.2 release. On top of Galvo support, 1.2 comes with a number of new features including: Sub-Layers Device Linked Libraries Head-Mounted ...
    • ODIN 32 55w Coherent Material Libraries

      This article and library are PRELIMINARY and still under development. *This information is provided “AS IS” to provide a starting point. It is always a good idea to run tests on each substrate and update the library as necessary. The Official Thunder ...
    • Crash Course - Photos In LightBurn

      This is a recorded webinar of Chris Locascio going over preparing a photo in LightBurn. The LightBurn file, original image, and meeting notes are attached below.
    • Calibrating Axes In LightBurn

      Preface: This article covers how to easily calibrate an Axis in Lightburn using the built in wizard Make sure you back up the Laser Machine Settings before you edit them:  Backing Up Machine and LightBurn Settings Tools you will need: Accurate ...
    • Safran Material Test