We have been getting this question quite often, especially from those coming from epilog, glowforge, and others. So we thought we would demonstrate how easy it is to import and export from other software, create and edit from within lightburn, and do a short project from design to finished product.
Please see the manual for the Thunder Bolt and Bolt Plus below. Note that the manual is Windows and RDworks centric due to being the GLOBAL manual. Thunder Laser USA has compiled information on Lightburn, Windows and MacOS in this knowledgebase that ...
Preface: This article describes how to set up a direct connection to the machine which omits routers, hubs and switches that can add complexity and may not work even if you are able to ping the machine. If you are connecting your laser through a ...
Preface: This articles covers some of the things that should be considered when installing a Thunder Laser into a work or school environment that has IT controls in place If you plan to install your machine at work or in an education environment that ...
If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.
Information contained in this Knowledgebase, on this page, in this or any other Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.