How to reseat a Bolt or Odin Laser head that has popped off the gantry rail

How to reseat a Bolt or Odin Laser head that has popped off the gantry rail

Ok so you bumped the laser head off the gantry. Not to worry, it can pop back on. Please watch the video below to see how.

Quickstart Video:





Other things to check or consider:
-Did you deform a bearing?
-Did you pop the gantry rail off the side tracks?
-Is your auto focus post in tact?
-Check to see if you also bent your air nozzle bracket.
    If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.

      Information contained in this Knowledgebase, on this page, in this or any other  Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.