How to replace the Exhaust Fan on a Bolt or Bolt Plus Thunder Laser

How to replace the Exhaust Fan on a Bolt or Bolt Plus Thunder Laser

Preface: This article covers how to replace the fan body of a Thunder Laser Bolt or Bolt Plus desktop laser. For this instruction, the existing mount and duct cones are re-used to simplify the swap.

Warning
Before starting work on your machine, disconnect it from power and maintain it in a safe state for the entire process.


    • Related Articles

    • Thunder Laser Bolt and Bolt Plus Unified User's Manual

      Please see the manual for the Thunder Bolt and Bolt Plus below. Note that the manual is Windows and RDworks centric due to being the GLOBAL manual. Thunder Laser USA has compiled information on Lightburn, Windows and MacOS in this knowledgebase that ...
    • Venting The Exhaust From Your Thunder Laser

      Preface: This article covers some key points about Venting Your Laser and adapting aftermarket exhaust components Important Considerations: Existing Systems Do not connect the exhaust output of this laser to an existing exhaust system. Please consult ...
    • How to replace the Bolt Air Assist Pump

      Preface: This article covers how to replace the Air Assist Pump on your Thunder Bolt
    • Thunder Bolt Series Laser Beam Mirror Alignment Guide

      Preface: This article covers How To align your laser beam in a three mirror gantry based Bolt laser. Quick Reference Video: Complete Guide To Bolt Series Laser Alignment We recommend you sit down at a computer to read this information. It is a lot to ...
    • How to check and Adjust the X and Y Axis Endstops on a Thunder Laser Bolt Series Machine

      Preface: This article contains information on how to the check the function of the Thunder Bolt Endstops and how to adjust them Quick Start Video: Complete Guide: This guide aims to cover how to check a Bolt X or Y Endstop for function, how to adjust ...
    If you are a Thunder Laser USA client and still need Technical Support after exhausting the resources in the Knowledge Base, simply email support@thunderlaserusa.com and the Technical Support Team will promptly assist you! You can also use the form here.

      Information contained in this Knowledgebase, on this page, in this or any other  Article etc. is the property of Thunder Laser USA and shall not be copied, re-used, sold etc. Do not copy, distribute, or reproduce without express written permission from Thunder Laser USA.