How to replace the Auto Focus probe on a Bolt Series and Odin Series Thunder Lasers

• Related Articles

• How to check and Adjust the X and Y Axis Endstops on a Thunder Laser Bolt Series Machine

  Preface: This article contains information on how to the check the function of the Thunder Bolt Endstops and how to adjust them Quick Start Video: Complete Guide: This guide aims to cover how to check a Bolt X or Y Endstop for function, how to adjust ...

• Thunder Laser Bolt Series Included Parts in tool pouch

  Preface: Here is more information on what is included in the tool pouch of your Thunder Laser Bolt Laser Machine Quick Start Video: Complete List: 1. Main power cord 2. USB PC Cable 3. Ethernet Cable 4. Lens Cleaning Swabs 5. Dust Blowing Ball 6. ...

• Thunder Bolt Auto Focus Post Maintenance and Tightening procedure

  Preface: This article covers how to tighten your Thunder Bolt Auto focus post and its maintenance Quick Start Video:

• The Usual Suspects and Preparing For Your 1 Hr. Training

  Preface: The Usual Suspects are the things that most commonly get overlooked or are incorrect that can burn up training time on things that should already be checked and if not mastered. If you choose to not follow this guide you will likely ...

• Thunder Bolt Troubleshooting guide for having an Alarm Messege on the Screen

  ***This article is a work in progress as we coordinate translations and clarity of the message, please be patient*** Below is a list of warning messages that may appear on the screen of your Thunder Bolt Machine 1、 Warning while trying to Frame or ...